A bass guitar is a stringed musical instrument that has a longer neck and a heavier, thicker body than a guitar. The bass guitar’s range of pitches is more extensive than that of the electric guitar, and the bass guitar is commonly used in a variety of musical genres. Some of the renowned brands are Fender, Yamaha, Ibanez, Squier etc.
Choosing the right bass guitar hardware is difficult as there are many factors to consider, such as the type of music you play, the size of your hands, and your budget. To make it easier to find the exact bass guitar hardware you’re looking for, we rounded up the best bass guitar hardware on Amazon, according to thousands of customer reviews.
Check out our favorite bass guitar hardware in the list below, and keep reading for our buying guide.
Our Editor’s Best Bass Guitar Hardware Reviews
- 2 Pack Pure Tone PTT1 Mono Full-contact Output Jacks
- US Spec - Requires a 3/8 inch mounting hole
- 2 concave ground contacts and 2 concave hot leads
- Increased Voltage Handling Capacity
- Cleaner, Stronger, Clearer Signal
- Package includes two knurled flat-top knobs and mounting set screws
- Designed to fit most 1/4" solid shaft potentiometers
- Fits most Telecaster and Precision Bass instruments (US and Mexico) manufactured from '51-Present
- Chrome
- Chrome-plated retainer
- Can be used on B, E or A string
- Used on most American Deluxe and Dimension bass guitars
- Fits American Deluxe and American Elite four and five-string basses
- The product is a string tree anchor used on bass guitar, which is mainly used to pull down the strings to make them have the correct pitch.
- The products are made of high-quality metal materials, which are durable and rust proof.
- The product can perfectly retain the strings, reduce string friction, save strings and maintain more accurate tuning.
- The product is very suitable for replacing damaged and old string holders.
- The product is equipped with 2 bass guitar string tree holders and 2 mounting screws, which is convenient to use.
- Fit for most Fender guitar or bass, Phillips ovalhead screws to fit countersunk pickguards and cover plates
- Screw Head Diameter: 1/8 inch( 3mm)
- Screw Length: 1/2 inch(12mm)，the standard for Fender
- Color: Gold; Material: Alloy Steel
- Package Including: 50xGold Pickguard screws.
- Genuine bone string nut
- For 7.25" fingerboard radius
- Pre-slotted
- 9.5” (241.45mm) top radius, 7.25" (184mm) bottom radius
- 1.780" (45.21 mm) wide
- Package contains twelve nickel, oval head, Phillips, (5 X 1 Inch ) screws used to mount vintage Fender Telecaster and bass bridges
- Also used for strap button mounting
- Some of our most requested replacement screws
- Made for Fender and used on a variety of vintage and contemporary models
- All store in a plastic box, convenient to carry and keep, includes 9 types of screws, 2 types guitar strap buttons and a tweezers for electric guitar, total 268 pieces.
- Made of solid and thicken metal for durable, anti-rust and not be deformed.
- Guitar screw assortment set will greatly improve efficiency, To all guitarists and luthiers.
- Guitar screw kit, basically make it easy for you to deal with guitar repair, meet all your need.
- Used to replace pickguard, back plate, neck plate, tele bridge, strat bredge, pickup ring, humbucker pickup, strat/tele pickup, selector switch.
- 1️⃣[ What You Get ]: 1pcs guitar neck plate comes with matching screws. The length is 2.55 inch / 65mm, the width is 2 inch / 51mm, and the distance between the mounting holes is 1.26 inch / 32mm.
- 2️⃣[ High-quality Material ]: The neck connecting plate is made of high-standard metal, sturdy and durable, and can be used for a long time without deformation. The protective plate is made of high-standard plastic, will not rust, and is very practical.
- 3️⃣[ Advance Design ]: The guitar neckplate has a variety of colors to choose from. After installation, it can match the guitar perfectly, and it can be used as an ornament to match a variety of styles. High cost performance, it is one of the essential music accessories for music lovers.
- 4️⃣[ Multi-purpose ]: The product is easy to install and compatible with most guitars, so it can be widely used in a variety of scenarios. For example, telecaster, bass, stratocaster, guitar, electric guitar and so on. Look forward to him being able to accompany you for a pleasant time.
- 5️⃣[100% Satisfaction Guarantee]: Jersvimc is committed to bringing a pleasant shopping experience to all customers. If anything happens to the product, please feel free to contact us. We solve the problem for you 24 hours a day, you can replace the defective product or return it for a refund within 30 days.
- KAISH high quality aftermarket Philips oval head hardened stainless steel(SUS 304) #3 x 3/8" pickguard screws for most Gibson Les Paul/SG guitars made in USA
- Right size for direct change on Vintage/Reissue(RI) or Contemporary Gibson electric guitars, no need to jam bigger screws than stock or enlarge screw holes on your guitar
- Never rust with stainless steel screws, high corrosion
- Common screws used for Pickguard/Back Plate and Switch Plate, please note the Gibson size screws are slightly smaller than the Fender size, so these screws are not for Fender guitars. No need to use larger screws on your Gibson Les Pauls, choose the right size but not sort of the right size screws for your guitars
- Please use a screwdriver of an appropriate size to prevent the philips head from being damaged. Package includes 30x stainless steel screws
Best Bass Guitar Hardware Buying Guide
Before choosing the best bass guitar hardware you should consider following options:
1. Bridge saddles: The number of bridge saddles you need depends on the string gauge you plan to use.
If you’re going with light-gauge strings, then you need a bridge with only two or three saddles. If you’re going with medium or heavy gauge strings, you need a bridge with four or more saddles.
2. String spacing: You need to make sure your strings are far enough apart so they don’t hit each other.
If you’re planning on using heavy-gauge strings, then you need more space between the strings to keep them from rubbing together and making noise.
3. String length: It’s pretty obvious that you need the strings to be long enough to reach the bridge.
But you also need to make sure that the strings aren’t too long, or else they’ll go over the nut and make noise when you’re not playing notes.
4. Tuning: If you’re planning on tuning your bass to different pitches, then you need a bridge with a locking mechanism. If you’re planning on tuning your bass to one specific pitch, then this isn’t necessary.
5. String tension: If you’re planning on using light-gauge strings, then you can get away with a bridge with a lower degree of string tension.
If you’re planning on using heavy-gauge strings, then you need a bridge with higher string tension.
6. Mounting style: There are two main ways to mount a bridge: through the body or with string mounting clips.
If you’re using heavy-gauge strings, then the through-body mounting style is the best option. If you’re using light-gauge strings, then you can get away with the string mounting clip option.
7. Cost: Bass bridges vary in price, depending on the material they’re made from, the number of string saddles, and the mounting style.
What else you should know about bass guitar hardware
1. What are the best bass guitar hardware brands?
There is no definitive answer to this question as it depends on personal preferences. Some of the most popular brands include Fender, Gibson, Ibanez, and Yamaha.
2. What are the best bass guitar hardware upgrades?
There is no definitive answer to this question as it depends on the specific needs and preferences of the bass player. However, some common hardware upgrades that can improve the performance of a bass guitar include new pickups, a new bridge, new tuners, and new strings.
3. What are the best bass guitar hardware kits?
There is no definitive answer to this question as it depends on personal preferences. Some bassists prefer kits that include all the necessary hardware, while others prefer to pick and choose individual pieces to create their own custom setup. Some popular bass guitar hardware kits include the Warwick RockBass Corvette Basic 5-Piece Hardware Set, the Fender Bassman 5F6-A Reissue Kit, and the Aguilar Tone Hammer 500 Bass Amp Kit.
4. What are the best bass guitar hardware options?
There is no definitive answer to this question as it depends on personal preferences. Some of the most popular hardware options for bass guitars include active pickups, string-through bridges, and Badass bridges.
5. What are the best bass guitar hardware features?
There is no definitive answer to this question as everyone’s preferences will differ. However, some popular hardware features for bass guitars include active pickups, a 5-way pickup selector, and a contoured body.
Conclusion
On the market, there are numerous best bass guitar hardware. Hopefully, the list of the top ten best bass guitar hardware will save you time researching and deciding on the best one for you.