The main job of any set of inline skating bearings is to help smooth out the ride by eliminating any excess friction between the wheels and the bearings. If your bearings leave a lot to be desired, then skating can be a very bumpy experience. So we’ve rounded up the best inline skating replacement bearings to smooth out the bumps in your skating stride.
Read on for more information about inline skating replacement bearings.
Our Editor’s Best Inline Skating Replacement Bearings Reviews
- Shaft Diameter : 6mm - 15/64''
- Hex Width : 4mm - 5/32''
- Overall Size : 42 x 13mm/1.65'' x 0.5''(L*D); The 1.65 inches/42mm is the full length, completely screwed axle(After the two ends of the skate wheel socket screw are fixed together)
- Material : Metal;Color : Silver Tone
- Package Content : 10x Inline Skate Wheel Screws for 6 mm axles
- ENOUGH TO USE: A set of 15pcs female skate axles for inline skating wheels
- LENGTH: The inline skate shoe axles outer diameter is 8mm and length is 35mm or 38mm
- & STURDY: Made of high quality steel with coating on the connecting part, it is , sturdy and not easy to loosen
- EASY TO INSTALL: Easy to install it on your skating shoes, convenient to use
- Only suitable for skating shoes required the female axle fittings on the wheel. Doesn't suit for roller skating shoes. Please check the length and suitability you need before ordering
- Wheel Axle Replacement: Used to replace damaged or worn wheel axles, these screw kits are a must for your daily maintenance of your inline skates, keeping your outdoor inline skating safe at all times.
- Durable & Sturdy: Made of high quality alloy with polished surface, the inline skates axle replacement parts are durable and wear-resistant, which are the perfect axle repair accessories.
- Smooth Motion: With bearings spacer and side plug to fix the bearings better, which is helpful to reduce drag on your bearings and make the motion of bearing more smoothly to prevent your bearings from collapsing.
- Size Details: The wheel axles are 6 mm in diameter, the side plugs are 6mm in inner diameter and 8 mm outer diameter, and the bearing spacers are 8 mm inner diameter and 10 mm outer diameter. Please check the detailed size information according to the pictures before ordering.
- Packing List: Each pack includes 8 pcs wheel axles with a length of 30 mm, 2 pcs axles with a length of 35 mm, 10 pcs screws, 8 pcs bearing spacers, 16 pcs side plugs and 2 pcs allen wrenches. Meet your inline skates daily maintenance needs.
- ✅【SIZE & DIAMETER & NOTE】 -- 76mm wheel diameter, 24mm wheel thickness, 84A hardness; bearing inner diameter 8mm, white plastic spacer inner diameter 6mm. NOTE: the white plastic spacer is suitable for 6mm axle, but if you pull it out, the wheel would be suitable for 8mm axle. Please check the specifications in the second product image to ensure it match your skates, and the package doesn't include any axles or screws.
- ✅【SUPERIOR MATERIAL】-- It adopted abrasion-resistant, high-density urethane material and super high-rebound PU, wear-resistant and solid, offers durable use experience without easily cracking. If the inner buckle of the wheel core is loose, it is recommened you could add a little bit of paper between the white plastic lip and the bearing to better fix the wheel.
- ✅【GREAT HARDNESS】-- This skate wheels hardness is 84A, which is great replacement for inline skates, luggage case wheels and roller skate wheels. But it's mainly used indoors, not recommended to use on uneven ground and use for sliding/ braking skating.
- ✅【PRACTICAL & HANDY】-- High-tech elastic material makes it movements easy. Perfectly suitable for indoor daily practice, recreational skating, extremely handy and practical, making you enjoy the skating time.
- ✅【PACKAGE INCLUDED】-- Pack of 8pcs inline replacement skate wheels, just in line with the needs of one pair of roller shoes, extremely meets your needs.
- ENOUGH SCREWS: There are 10pcs female and male skating screws in a pack, suitable for inline skating wheels. Note: Both ends of the screw rod and nut must be inserted 4mm hex wrench to screw, and if only use an hex wrench, then it will turn with the However, and will not screw tightly.
- TWO SIZE: 31mm skating screw is the perfect replacement for the front wheel. 36mm skating screw is the perfect replacement for the rear wheel and brake bolt.
- DURABLE & STURDY: Made of high quality iron with coating on the connecting part, it is durable, sturdy and not easy to loosen. Good to improve the service life and durability of the bearing. Easy to solve the straight line roller skating damage.
- EASY TO INSTALL: Only suitable for skating shoes required the male and female screw fittings on the wheel. You can easily fix the two ends of the shoes with the hexagonal installation tool
- INLINE SKATE WHEEL SCREWS: In order to outdoor skating safely, you need to replace the broken inline skate screws regularly. These inline roller skate wheel socket screws are small in size, easy and portable for you to carry and store
- 【DURABLE CONSTRUCTION】-- Made of aluminum alloy, easy to dissipate heat, and it can provide the flexible rotation that make it durable.
- 【PROVIDE SMOOTH MOTION】-- With spacer, axle and extra side plug to fix the bearings better, which is helpful to reduce drag on your bearings and make the motion of bearing more smoothly, helping to prevent your bearings from collapsing.
- 【EASY TO MATCH】-- The recessed part of the spacer fits between the bearings, providing a seamless integration to the wheels, which makes it easy to support the wheels and bearings, and they are easy to match the skating male and female axles.
- 【COMPATIBILITY & SIZE】-- Axle diameter 6mm, frame spacer inner diameter 6mm, wheel spacer inner diameter 8mm, suitable for most roller skates model using 6mm axles. Please check the specifications in the second product image to ensure it match your specifications. It is very important to measure your wheel bearing dimension to ensure a proper fit.
- 【PACK & NOTE】-- Pack of 2pcs 6mm axles (36mm), 8pcs 6mm axles (31mm), 10pcs screws, 8pcs 8mm wheel spacers, 16pcs 6mm frame spacers, 2pcs 4mm Allen wrench.
- Great Inline Skates Replacement Screws: The 1.25" skating screw is the perfect replacement for the front wheel. And the 1.5" skating screws are perfect replacement for the rear wheel and brake bolts.
- Out Diameter of Shaft: 15/64"(6mm); Length of Shaft: 1.42inch(36mm).
- Width of Screw Hex: 4mm - 5/32"; Total Length 1.5"(completely screwed axle).
- Quality Craftsmanship: These inline skate screws for wheel are made of quality metal with coating on the connecting part, silver finished. Sturdy and not easy to loosen.
- Package Included: 5 pieces 1-1/4 inches and 5 pieces 1-1/2 inches Inline Skate Wheel Screws for 6 mm axles and 2 x installation tools, enough to meet your long-term needs.
- Package included: 8 Pairs 30mm Screw + 2 Pairs 35mm Screw + 2 Pcs Installation Tool
- Complete Tools, Simple And Convenient Installation
- Suitable For Adult And Child Roller Skates, Not Suitable For Fitness Roller Skates.
- Specification: Divided Into 2 Sizes, The Short Screw 30mm Is Used For The Front Wheel, The Long Screw 35mm Is Used For The Brake, And The Bracket Is Equipped With 35mm Screws. Two Installation Tool Wrenches Are Required During Installation To Ensure A More Secure Installation
- Instructions For Wrench Use: Use 2 Wrenches, Fix Them On Both Sides And Rotate Them On One Side To Remove The Screws
- QUALITY & DURABILITY - Made of high-quality lubricated 608ZZ ABEC-5 steel
- OPTIMAL PERFORMANCE - Features dual shields for optimum lubrication and reduction of contaminants
- MATERIAL OPTIONS - Available in carbon or chrome steel. Versatile: inline, roller blade, rollerskate, skateboard, eletric skateboard, RipStik & more.
- QUALITY GUARANTEE - We provide only high-quality bearings. If you are not fully satisfied for any reason, simply contact us and we'll be there to support you.
- ⛸DURABLE & SOLID: Skates bearing spacer made of high quality Aluminium , durable and useful.
- ⛸BASIC REPLACEMENT BUSHING: The spacer are basic replacement bushings for most skates.
- ⛸BASIC REPLACEMENT BUSHING: The spacer are basic replacement bushings for most skates.
- ⛸REPLACEMENT REGULARLY: The skate bushing will get abrasion after long time use, in order to keep the wheel bearing smoothly, it's necessary to change the bearing bushing regularly.
- ⛸ENOUGH TO USE: 8 pieces a pack, enough to meet your skating needs. Add decent bearings for maximum performance! It is a great accessory for skating shoes.
Best Inline Skating Replacement Bearings Buying Guide
Before choosing the best inline skating replacement bearings you should consider following options:
1. Bearing size: The first thing you should do when picking replacement bearings is consider the size. The size of the bearings you’re looking for will depend on your needs.
If you’re replacing bearings for your inline skates, you’ll want to measure the diameter of your wheels. If you plan to replace bearings for your longboard, you’ll want to measure the diameter of the trucks.
The most common size used for inline skates is 608, but you can also find several other types of bearings, like the 629 or 688.
Longboard bearings are usually sized by the diameter of the truck axle. For example, 8mm bearings are used for trucks with axles measuring 8mm.
2. Bearing materials: Most bearings are made with steel balls surrounded by a cage made of a combination of steel and nylon.
But there are other alternatives, such as ceramic bearings, that use balls made entirely of ceramics.
The main difference between the different bearing materials is the lifespan. Steel bearings are cheaper, but they are also rougher, so they’re more likely to damage the surface they roll on.
Ceramic bearings have a smoother ride and last longer, but they’re also more expensive.
3. Quality: Make sure the bearings you choose are of good quality. When shopping for bearings, look for a package that includes a set of two bearings, as well as a center cap.
These caps are important, as they keep the balls in place and protect them from damage. You should also check the speed of the bearings. Some bearings are labeled with a letter, as well as a number.
The letter tells you the speed of the bearing, while the number tells you the diameter in millimeters. Higher numbers indicate faster bearings.
4. Cost: The cost of bearings depends on the materials used, but also on the size, quality, and quantity. Smaller bearings tend to be cheaper than larger ones.
Sometimes, replacing just one bearing can be enough to solve a problem, but it’s also possible that both need to be replaced.
What else you should know about inline skating replacement bearings
1. What size bearings do I need for my inline skates?
The size of bearings for inline skates is typically measured in millimeters (mm). The most common sizes are 80mm, 84mm, and 90mm.
2. How do I know when my bearings need to be replaced?
The best way to know if your bearings need to be replaced is to consult your skateboard manufacturer or a professional skateboard mechanic.
3. How often should I replace my bearings?
The general rule of thumb is to replace your bearings every 3-6 months, depending on how often you skate.
4. What is the difference between bearing grades?
There are different grades of bearings, which are determined by the quality of the materials used and the manufacturing process. The higher the grade, the higher the precision of the bearing and the greater the load capacity.
5. How do I replace my bearings?
If your bearings are damaged or worn out, you will need to replace them. You can purchase new bearings at most hardware or auto parts stores. To replace the bearings, you will need to remove the old bearings and press the new bearings into place.
Conclusion
On the market, there are numerous best inline skating replacement bearings. Hopefully, the list of the top ten best inline skating replacement bearings will save you time researching and deciding on the best one for you.