If you’re looking for an air gun, you’ve probably noticed that they’re not exactly cheap. But if you’re considering a foraging gun for busting up birds’ nests or a vermin-killing revolver for rat eradication, it’s probably worth the investment. However, those same guns are often so well-made that they’re worth holding on to for years to come.
The only problem is that if you want to actually use those guns, you’ll need to find a way to mount them on a gun rest or a shooting ledge. That’s where air gun mounts come in.
Read on for our list of the best air gun mounts.
Our Editor’s Best Air Gun Mounts Reviews
- Double scope ring mount for 11 mm dovetail rail, specialized scope mount for Airgun/.22 Rails.
- Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
- Lightweight: 1.15 oz per ring. High profile, 20 mm/0.79 in gap from base of mount to bottom of rings. ( Item height: 1.97'')
- The ring is for most scopes which are in 1''/ 25.4 mm scope tube.
- With only 1 rail clamp screw and 1 scope clamp screw per side, quick and easy to install. Precision and Repeatable Alignment.
- Precision Machined from Aircraft-grade aluminum alloy with anodized black matte finish
- Complete with stop-pin for rock solid application
- Ring base designed with locking Hex screws to tightly fit on mounts with airgun/.22 dovetail dimensions
- Reversible locking plate to fit full range of airgun/.22 rails
- AIR GUN SCOPE: The Western Justice LASSO Scope Mount is a perfect attachment that helps keep any air gun scope secure during use. Scopes give better range and optics on your air rifles, and this mount is the ideal attachment for your scope.
- AIR GUN COMPATIBILITY: This high-powered air rifle scope LASSO mount is compatible with Red Ryder, Lil Duke, and Lil Sure Shot air rifles. The scope mount attachment gives you better control and precision and more powerful shots.
- HIGH-QUALITY MATERIALS: The 3/8-inch dovetail mount has an aluminum construction and weighs 0.15 lbs., making it a lightweight rifle scope mount that's easy to carry. Our sturdy mount will keep your scopes steady and secure at all times.
- INSTALLATION: Remove the elevation ramp from the rear sight and use a screwdriver to remove the rear stock screw. Slide the mount base forward into the top of the air gun and replace the rear stock screw. Attach an air gun scope on top of the mount.
- AIR VENTURI: Since 2010, we've been an innovator in the airsoft guns and accessories industry. Our quality airsoft equipment lasts you through years of use. Rely on our air rifle and BB gun accessories to give you a safe and fun shooting experience.
- .22/Airgun Mount Base to Weaver/Picatinny Tactical Rail Adaptor
- .22/Airgun Mount Base to Weaver/Picatinny Tactical Rail Adaptor
- Fits on 11mm dovetail rail.
- 5" long, the top rail with 10 slots.
- Made from Aircraft Grade Aluminum Alloy with Matte Black Finish
- One Piece Scope Mount with Integral two 1" Rings
- 4 Clamping Screws,Fit 11mm Dovetail
- Fits all scopes with a one inch body tube, Full length 4 inch
- Threaded stop pin can be easily activated
- Great for use on high power magnum air rifles
- Precision Machined From Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish
- Complete with Stop-Pin for Rock Solid Application
- Ring Base Designed with Locking Hex Screws to Tightly Fit on Mounts with Airgun/.22 Dovetail Dimensions
- Reversible Locking Plate to Fit Full Range of Airgun/.22 Rails
- The center portion distancing is 58mm
- Sturdy scope ring mount for 11 mm dovetail mounts.
- One of the dovetail rings features a stop pin, for rock solid application.
- High profile, 21 mm(0.8 inch) from top of the dovetail rail to bottom of rings ( Item height: 1.9 inch).
- The scope ring is for most scopes which are in 1 inch/ 25.4 mm scope tube.
- With two rail clamp screws and four scope clamp screws, Precision and Repeatable Alignment.
- The ultimate in scope mount design for today's magnum spring guns
- Utilizes a generous quantity of 4 mounting lug screws to ensure an extremely rigid fit
- Designed with 2 recoil pins to provide extreme holding power
- Has been tested on the fixed-barrel side cocking RWS rifles with great success
- Makes scope mounting a simple task
- Dual ring scope mount fits standard 30mm tube rifle scopes.
- 2 pcs 30mm scope rings fit air gun rails. Shockproof design for high recoil rifles.
- Built-in tape inside scope rings provide cushioning and prevent slippage of the scope in the rings, offering easy installation and secure fit.
- Made out of durable high quality material - 6061-T6 aluminium alloy. Sturdy and durable.
- Solid one piece design and built-in threaded stop pin for max. holding power
- Good for 1inch tube full size rifle scopes with objective OD(outside diameter) 40mm or less
- Fits onto 3/8inch dovetail bases or grooved receiver top
- 4 clamping screws at the bottom for max. holding power
- Authentic airgun specialty Hammers products
Best Air Gun Mounts Buying Guide
Before choosing the best air gun mounts you should consider following options:
1. Fixed mounts: Fixed mounts are great for hunting. You can use a fixed mount anywhere, but they are best in areas with a lot of wind. A fixed mount uses a single point to hold the gun, so the gun will move with the slightest wind.
2. Variable mounts: Variable mounts use two points to hold the gun. This gives the gun a bit of resistance to the wind, but it’s not great for all conditions.
3. Suction cup mounts: These work great in some conditions, but not in all. The suction cup can stick to smooth surfaces like windows and windshields, but not always to wood.
4. Window mounts: These are best for hunting in open areas with little to no wind. You can place a window mount on a window on the second floor of a building.
5. Tripod mounts: These are great in all conditions. You can place the tripod on the ground or on a table. The tripod is great for taking shots over a longer distance.
6. Bi-pod mounts: This type of mount gives the gun some resistance to the wind. It also gives some support for taking longer shots.
7. Harness mounts: This is the best option for hunting in all conditions. You can wear the harness and move around with the gun attached.
8. Belt clip or holster mounts: This is a good option for walking around with the gun attached. It’s not the best option for hunting.
9. Rifle or shotgun mounts: You can attach your hunting rifle or shotgun to any of the above mounts.
10. Air rifle mounts: You can attach any rifle or gun that uses pneumatic air to any of the above mounts.
Air gun mounts are an affordable way to hold your gun. Most can be found for under $20, and some as low as $10. They are also easy to install. Most can be attached in under a minute.
Most air gun mounts use a single point to hold the gun, so they all have the same advantages and disadvantages.
Fixed mounts are a great option for shooting in windy areas. Variable mounts can be used in most conditions.
Suction cup mounts are the best option for shooting out of a window, while the tripod is the best option for shooting from the ground.
Harness and belt clip mounts are best for hunting in all conditions.
What else you should know about air gun mounts
1. What are air gun mounts?
Air gun mounts are used to attach air guns to surfaces.
2. What are the different types of air gun mounts?
There are many different types of air gun mounts, including:
– Fixed mounts: These are typically found on pistols and rifles, and can be either screwed or bolted onto the gun.
– Break barrel mounts: These are designed for break barrel air guns, and typically use a clamping system to attach to the gun.
– Underlever mounts: These are designed for underlever air guns, and use a similar clamping system to break barrel mounts.
– Sidelever mounts: These are designed for sidelever air guns, and use a similar clamping system to break barrel mounts.
– Overlever mounts: These are designed for overlever air guns, and use a similar clamping system to break barrel mounts.
3. What are the benefits of using an air gun mount?
There are many benefits of using an air gun mount. They include:
1. Increased accuracy – When your gun is mounted on an air gun mount, it will be more stable and therefore more accurate.
2. Increased stability – The mount will help to keep your gun steadier, making it easier to shoot accurately.
3. Easier to use – An air gun mount can make it easier to aim and fire your gun, as well as make it easier to reload.
4. Better protection – A mount can help to protect your gun from damage, as well as keep it away from children and other people who should not be handling it.
5. Greater versatility – An air gun mount can be used with a variety of different guns, making it a versatile piece of equipment.
4. How do I choose the right air gun mount for my gun?
There is no one definitive answer to this question. Every gun and every situation is different. There are many factors to consider, such as the weight and size of the gun, the type of gun, the intended use, and the specific mounting requirements. The best way to determine the best air gun mount for your gun is to consult with a knowledgeable expert.
5. How do I install an air gun mount?
Air gun mounts typically have four screws that need to be driven into the wall in order to secure the mount. The first step is to find a location on the wall that is suitable for the gun mount. Once a location is selected, hold the gun mount up to the wall and use a pencil to mark the location of the four screws. Next, remove the gun mount from the wall and drill pilot holes into the marks. Finally, drive the screws into the pilot holes and secure the gun mount to the wall.
Conclusion
On the market, there are numerous best air gun mounts. Hopefully, the list of the top ten best air gun mounts will save you time researching and deciding on the best one for you.