If you’ve been paying attention to the latest trends in bike parts, you’ve probably noticed a lot of brakes being referred to as hydraulic. What’s the difference between these brakes and the standard cable-pull brakes you’ve been riding for years? The answer is in the braking action. Hydraulic brakes use a hydraulic system to create a near-frictionless braking action, and the difference is noticeable when you’re riding. These brakes allow you to stop with more precision and control than standard brakes, no matter how hard you’re pushing yourself on the bike.
To help you pick the best bike brake calipers, here’s what you need to know.
Our Editor’s Best Bike Brake Calipers Reviews
- Braking System: Cable-actuated hydraulic disc brake.
- Upgrade Design: HB-100 uses a new hydraulic line pull clamp technology. The block of the HB-100 mechanical disc brake caliper is equipped with built-in brake oil, and then the brake clamp is used to control the line pulling hydraulic brake of the hydraulic clamp. The cylinder of the clamp is built-in brake oil.
- Cable-Pull Hydraulic Caliper: Front /Rear Disc calipers are made of premium aluminum material with oil cylinder-driven two-way brake pad movement， Braking is very smooth in the wettest conditions or the steepest downhills.
- Adjust Tightness: Bike disc brake sets has elastic fine adjustment screw help you fine-tune the inner brake line to achieve an ideal brake feel.
- Compatible: Suitable for mountain, road, folding bikes, E-bikes, and electric scooters.
- Mechanical Disc Brake caliper:made of high-quality aluminum alloy material,compact structure,light weight, durable,anti-corrosion,rust prevention,and good heat dissipation effect.
- Easy to Install: The kit has mounting screws, so the brake caliper is easy to install on the bicycle. Suitable for two main types of disc brake mounting,51mm IS mounting and 74mm Post mounting.
- Easy Adjustment: the internal thread elastic fine adjustment screw of the brake and the brake pad adjuster screw can help you easily adjust the gap between the brake disc and the brake caliper;Long rectangular opening for convenient and effective brake pad replacement.
- Front and Rear Brakes: front caliper is 0mm, rear caliper is 20mm,front brake is 180MM/160MM disc brake disc,rear brake is 160MM/140MM disc brake disc,front and rear brakes are compatible with 160mm rotor.
- Brake System:One-way piston linear pull mechanical disc brake is used for the brake system of folding bicycles,mountain bikes,BMX,fixed gear bicycles and road bikes.
- Application: bike brakes kit,suitable for Children most bicycles,Height of break pad adjustable 20mm；See Figure 2 for detailed dimensions
- Material: The bike brakes kit is made of high-quality aluminum alloy, and the brake cable is also made of high-quality aluminum alloy. It is durable and can be used for a long time. It is resistant to cold, heat and oxidation, and is not easily deformed. It ensures that the brakes are sensitive and suitable for most weather conditions
- Product size: Front brake cable length: 55cm/21.65"; Rear brake cable length: 155cm/61.02".and the bicycle brake handle is suitable for handlebars with a diameter of 2.2 cm / 0.87"
- Easy to install: Quickly replace the old bicycle brake and tighten it with the corresponding brake fixing hole; pass the brake wire through the brake wire tube in turn to fix the position of the metal wire tube; then fix it on the bolt, install the brake pads, and adjust the distance of the brake wire , Position and length, and then fix the brake cable
- You will get: 2 pieces bike C shape brake, 1 pair aluminum bicycle brake lever brake housing, 1 pair cable brakes V type replacement set
- Indexed quick release
- Radiussed brake shoe washers allow easy adjustment of toe-in and rim contact angle
- Indexed quick release
- Accepts tires up to 28mm wide
- Pad Type: Cartridge
- Braking System: Cable-actuated hydraulic disc brake.
- With oil cylinder-driven 2-piston brake pad movement to maximize clamping force and ensure consistency as the rotor engages with the brake pads on both sides, resulting in smooth braking.
- MTB hydraulic disc brakes with internal fine-tuning screws are included, allowing adjustment of the tightness of the brake inner wire.
- ZOOM front and rear bicycle brake calipers is suitable for mountain, road, folding bikes, E-bikes, and electric scooters.
- The brake caliper features a one-piece forged aluminum body and all CNC parts. The cylinder of the clamp is built-in brake oil.
- 【Heat Dissipation】Aluminum alloy disc brake caliper anti corrosive and rustproof metal material.Excellent heat dissipation effect.
- 【Strong Control】MTB bike caliper, durable and useful. With strong braking force, smooth and stable control. All angle clamp installation for easy and precise positioning of brake pads.
- 【Adjust Tightness】 brake device allows adjust the tightness, left and right width. Easy to install on your bike.
- 【Defromation Resistance】Surface ground both sides for ultra-flat braking surface, high grade warp resistant metal.
- 【Adapted rotor size】F160 / R140 Front Brake: If installed at front wheel, it fits 160mm rotor, but if installed at rear wheel, it fits 140mm rotor; F180 / R160 Rear Brake: If installed at front wheel, it fits 180mm rotor, but if installed at rear wheel, it fits 160mm rotor.
- Note: Please confirm your tire size before buying, and make sure your bike frame or fork has a hole to install the brake.
- C Brake Size: Front brake total length of screws on the back is 48mm/1.89in, Rear brake is 32mm/1.26in. Height of break pad adjustable 22mm (68~90mm). You can adjust the up-and-down distance of the brake to make you more comfortable when riding.
- High-quality material: FOMTOR’s C brake is made of 6061 T6 aluminum alloy. C Brake is equipped with wear rubber brake pads, which are rust-proof and not easy to deform. The grooves on the rubber pad can improve the braking efficiency, so that you can ride smoothly and safely.
- Easy installation and adjustment: The structure of the bicycle brake device is very simple, and it is easier to install on the bicycle, so that you can quickly replace the old bicycle brake.
- Package Includes: Alloy front & rear calipers X 2 (Silver, Wheight: 400g). It is suitable for most fixed gear mountain bikes and road bikes.
- 🚲【EXCELLENT PERFORMANCE】: The dual-pivot road bike brake set adopts excellent manufacturing process with high reliability, the brake pads are wear-resistant and tough, and the grooves on it can improve braking efficacy to make cycling safer.
- 🚲【PREMIUM QUALITY MATERIAL】: The pair of 100% brand new bike brakes is made of high quality aluminium alloy material, sturdy, anti-aging and durable, It can adapt to various outdoor conditions. It can be used normally even in extreme weather conditions and is an ideal companion for bicycles.
- 🚲【HIGH SECURITY】: 2pcs per set, one for front wheel, one for the rear.The front and rear wheels are used together for better braking and safety. Economical and practical bicycle repair accessories to ensure travel safety.
- 🚲【Easy INSTALLATION】: Suitable for road bikes with mechanical brake, it is suitable for a wide range of scenarios. Mounting screws center to center of clip distance: 48mm~63mm; brake pad length: Approx 55mm / 2.17in. This bicycle brake set is easy to install, no modification is required, which is a high cost effective repair part for bike maintenance.
- 🚲【SCOPE OF APPLICATIONS】: 2pcs per set, one for front wheel, one for the rear. Size: approx. 10.5 x 10 x 8.5cm / 4.13 x 3.94 x 3.35in, the bike brake is suitable for road bikes with mechanical brake.
- Full bike brakes calipers set - 1 pair alloy front & rear calipers, 1 pair plastic brake levers, 1 pair brake cables housing (front and rear), 8 pieces rubber brake pads replacements
- Bike brake levers suitable for 7/8 inch/ 22.2mm bicycle handlebars, fit for most BMX and MTB bikes
- It is suitable for bike frames 69-96mm long rear & front C caliper brake, before purchasing please measure distance between the mounting hole and braking surface
- Our brake wires fit a variety bikes ,if it is longer than you needed, you can cut to fit your requirements
- Easy to install and practical functions: you can replace the old bike brakes and tighten it with the fixing hole; good bikes set ensure smooth and safe riding
- Cable actuated
- Single 74mm caliper
- For use with Linear-pull MTB levers
- B01S Resin Pads
- Rotor not included
Best Bike Brake Calipers Buying Guide
Before choosing the best bike brake calipers you should consider following options:
1. Rim Compatibility: Internal or external calipers are designed to fit either standard or tubular rims.
Most road and cyclocross bikes have standard rims. If you are buying a caliper for a mountain bike or hybrid, make sure it fits the type of rim you have.
2. Disc Brake Compatibility: Disc brake calipers are available in two types: direct mount and standard mount.
Standard mount calipers use a mounting bracket to attach to the disc brake and are compatible with any standard or disc brake wheel.
Direct mount calipers bolt directly to the disc brake, so mounting a wheel with a different brake type will require new calipers.
3. Cable or Mechanical System: Mechanical systems are a single piston that operates both the in and out brakes. Cable-operated calipers have two pistons – one for the in brake and one for the out brake.
Cable-operated calipers are lighter and simpler, while mechanical systems offer more power and modulation.
4. Cable Length: External cable-operated calipers can be adjusted between the brake and lever, so if the cable is too long the brake won’t engage.
Internal cable-operated calipers have a fixed cable length, so make sure the caliper you choose has a cable length that fits the cable routing of your bike.
5. Caliper Mounting Position: Most calipers have a standard mounting position, but some are available with a low position.
If you are mounting disc brakes on a frame with limited clearance, choosing calipers with a low position will allow you to place the caliper farther back on the disc mount.
6. Lever Feel: The feel of a caliper’s lever is subjective, but there are some differences between models.
Some calipers offer a lighter feel, while others provide more power.
Others are specifically designed for smooth modulation for cyclocross racing.
What else you should know about bike brake calipers
1. What is a bike brake caliper?
A brake caliper is a device on a bicycle that contains the brake pads and applies pressure to the spinning wheel to slow it down.
2. How do bike brake calipers work?
Brake calipers are the component of a bicycle’s brake system that squeeze the brake pads against the wheel rims to slow the bicycle down. The calipers are mounted on the frame or fork of the bicycle, and are operated by a cable that runs from the brake levers to the calipers.
3. What are the benefits of using bike brake calipers?
Bike brake calipers offer several benefits over other types of brakes. They are lighter weight, more aerodynamic, and provide more stopping power. Additionally, calipers offer better modulation and feel, making them the preferred choice for many riders.
4. How do I choose the right bike brake caliper for my bike?
There is no definitive answer, as the best bike brake caliper for your bike depends on a number of factors, including the type of bike you have, your riding style, and your budget. However, some general tips on choosing the right bike brake caliper for your bike include:
– If you have a road bike, you will want a brake caliper that is designed for road biking, as these calipers are typically lighter and more aerodynamic than other types of brake calipers.
– If you have a mountain bike, you will want a brake caliper that is designed for mountain biking, as these calipers are typically more durable and offer more stopping power than other types of brake calipers.
– If you are a casual rider, you may not need a brake caliper that is as performance-oriented as one that is designed for competitive riders.
– If you are on a budget, you may want to consider a less expensive brake caliper, such as a v-brake caliper, as these typically offer good performance at a lower price point.
5. How do I install bike brake calipers?
Bike brake calipers typically attach to the frame of the bike with bolts. To install them, first line up the calipers with the holes in the frame. Then, use a Allen wrench or hex key to tighten the bolts until the calipers are secure. Make sure not to overtighten the bolts, as this can damage the calipers.
Conclusion
On the market, there are numerous best bike brake calipers. Hopefully, the list of the top ten best bike brake calipers will save you time researching and deciding on the best one for you.